CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ANSYS Meshing] Hex mesh of a gasket (http://www.cfd-online.com/Forums/ansys-meshing/112016-hex-mesh-gasket.html)

Exanimis January 20, 2013 10:03

Hex mesh of a gasket
 
Hello,

How can I achive a regular hex mesh of gasket in ansys workbench 14 ? Something like this ?
http://www.swiat-szkla.pl/images/art...009_04/247.png

An list of settings and steps would be the best answer.

Thanks in advance.

Far January 20, 2013 10:33

I can help you in ICEM. Although it can be done in AM

Exanimis January 20, 2013 11:28

Quote:

Originally Posted by Far (Post 402941)
I can help you in ICEM. Although it can be done in ICEM

No problem I can try in ICEM although im affraid there will be a problem importing the whole assembly into ICEM becouse it was done in autodesk inventor :/

If there is no other way i can remake it in a different program but which one ?
Here is a screen of the assembly with a meshing made by me:
http://s7.postimage.org/lgbdwoycr/Capture1.jpg
http://s2.postimage.org/7w2u6erq1/Capture2.jpg


All times are GMT -4. The time now is 17:10.