CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] 3d vof (http://www.cfd-online.com/Forums/ansys-meshing/112049-3d-vof.html)

Smaras January 21, 2013 07:58

3d vof
 
Hello,

Need some some help i am working on 3D VOF simulation for EAF for my thesis work. I have worked with 2D meshing on ICEM and almost got good result special thanks to RodriguezFatz.

Now having trouble with 3D in grid independence.

So if anyone can help me in grid independence and better meshing (tetra+ prism meshing) of 3D cylinders.

Would be thankful for your reply.

Regards,

Smaras

Far January 21, 2013 10:12

Yes can be done. Now you have downloaded mesh refinement tool, you can try and come back if you get problems.

I usually use tgrid for the mesh refinement and ICEM for the surfaces mesh (either from octree or directly through shell meshing)

Smaras January 21, 2013 10:28

Quote:

Originally Posted by Far (Post 403121)
Yes can be done. Now you have downloaded mesh refinement tool, you can try and come back if you get problems.

I usually use tgrid for the mesh refinement and ICEM for the surfaces mesh (either from octree or directly through shell meshing)

Thanks Far after searching a lot i found that. I'll do that then will come back to this forum.

Regards,

Smaras


All times are GMT -4. The time now is 17:44.