CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Export Geometry from the ICEM (http://www.cfd-online.com/Forums/ansys-meshing/112060-export-geometry-icem.html)

asal January 21, 2013 09:54

Export Geometry from the ICEM
 
Hello everyone.

I have import a geometry from a cad file to ICEM to made some modification.
then I export the geometry as .IGS and or .STL
but there is something strange here!! when I want t import again this exported geometry, then the only surfaces which I made in ICEN (the surfaces which are created in the modify process) will open and the other surfaces which are originally created vanished! So I have just the surfaces and curves which I built in ICEM and not builted by CAD file.
hopefully I can explain what is going on.

Is any body has any idea about the case?

Far January 21, 2013 10:49

Export in step and parasolid. And import both and see what you get.

asal January 21, 2013 15:46

Hello and thanks for your reply
In the ICEM, you cannot export to step file! how can I do that?

for exporting in Parasolid format I got this error:

ICEM CFD - Parasolid Writer 12.0.1 (Build 9.4.10.16)
Parasolid Kernel Version 19.1 (Build 307)
Copyright (C) 2009 Ansys Inc./ICEM CFD Engineering


Checking for License...Failed.
child process exited abnormally
Done.

asal February 3, 2013 06:54

Any Idea?!

Far February 3, 2013 08:01

it look likes a license issue.


All times are GMT -4. The time now is 20:10.