|January 28, 2013, 03:37||
Mesh modification for more CPUs
Join Date: Jul 2010
Posts: 20Rep Power: 7
I am simulating the occurrence of natural convection due to temperature gradient in a containment. The main goal is to discover the impact of natural convection on a stratified layer.
My current mesh consists of two connected domains - helium domain and air + steam domain. The upper - helium domain is smaller and has around 17000 nodes, the lower domain has about 190000 nodes.
So far I have been able to use 4 CPUs because of the Ovlp factor that should have the value no greater than 10%.
Is there any way I could modify my mesh and use more CPUs for my calculations?
Thank you in advance to anyone that might be able help me.
|Thread||Thread Starter||Forum||Replies||Last Post|
|[ICEM] surface mesh merging problem||everest||ANSYS Meshing & Geometry||40||January 20, 2016 01:08|
|Add Mesh Layers doesnt work on the whole surface||Kryo||OpenFOAM Native Meshers: snappyHexMesh and Others||8||September 13, 2012 09:28|
|Converting Starccm+ mesh||Ladnam||OpenFOAM||0||September 14, 2011 06:30|
|snappyHexMesh won't work - zeros everywhere!||sc298||OpenFOAM Native Meshers: snappyHexMesh and Others||2||March 27, 2011 21:11|
|basic of mesh refinement||arya||CFX||4||June 19, 2007 12:21|