CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ANSYS Meshing] problem with the mesh (http://www.cfd-online.com/Forums/ansys-meshing/112516-problem-mesh.html)

yahya January 30, 2013 09:33

problem with the mesh
 
I tried to generate a mesh for considerebly complexed geometry
but I got the following errors and warnings
1) Error: The following surfaces cannot be meshed with acceptable quality. Try using a different element size or virtual topology.

2) Warning: The following surface or surface bounds may have incorrect orientation

3)Warning: The advanced size function failed to initialize the following topologies.

4)Error: A mesh could not be generated using the current meshing options and settings. Hint: The problem geometry areas might have been highlighted. Switching to wireframe mode may make them more visible.

can anyone help me in this regard?

akmenon August 6, 2015 08:19

did you find a solution to this problem?

Kapi August 6, 2015 18:19

Quote:

did you find a solution to this problem?
Yes the answer is already in the error!

Quote:

Hint: The problem geometry areas might have been highlighted. Switching to wireframe mode may make them more visible.
change to wireframe mode then right click "Mesh" and go to problematic geometry. It shall highlight the problem and you can work it around form thr!

Cheers
KAPI


All times are GMT -4. The time now is 03:19.