Yet another opinion on a blocking
Dear friends,
I have this geometry, project file is here https://dl.dropbox.com/u/35161486/He...%20quarter.zip here are some screenshot of the geometry and the blocking : https://dl.dropbox.com/u/35161486/yet_1.png I spent a lot of times trying to improve the quality, ended up finally wondering if the blocking was good enough. Can you help me improve the quality ? i now it can be one of the hardest task ! Please feel free to suggest any other strategy. https://dl.dropbox.com/u/35161486/yet_2.png Here again, i decided to mesh one quarter, i will mirror the mesh later to get the full mesh. i find it easier this way as i have to deal with less holes... Thanks a lot |
good approach. Simon usually recommend this way of working in ICEM
|
You see that left bottom small circle, too much elements are there, and i can't do anything about because of the parallel edges. this why i asked about the refinement in the other thread, i'm planing to use a refinement of 1/2 there...
|
did you try multizone meshing of R14.5? I guess it is awesome to try.
|
I don't have version 14.5 yet...
|
Quote:
May be using some other topology resolves this problem... |
show me what you got :p
|
All times are GMT -4. The time now is 16:03. |