CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Removing the Unstructured Mesh from an ICEM Project (http://www.cfd-online.com/Forums/ansys-meshing/112646-removing-unstructured-mesh-icem-project.html)

scribby182 February 1, 2013 14:27

Removing the Unstructured Mesh from an ICEM Project
 
I'm sure I'm repeating a past question, but I can't seem to find an answer so please forgive me.

Is there a way in ICEM to discard the existing unstructured mesh from a project? I am meshing something using the structured controls and then converting the pre-mesh to unstructured for CFX, and I have a past iteration of the unstructured mesh associated with the project. Is there any way to remove that unstructured mesh without replacing it? I'm making large changes to the pre-mesh and it takes 30-60 seconds to save the unstructured mesh every time I save the project. The only way I've come up with is to delete the .uns file before opening the project, but it seems like there should be a better way.

Thanks for your help,

Scribby182

diamondx February 1, 2013 16:41

File - mesh - close mesh

scribby182 February 1, 2013 19:00

Nice! Thanks!


All times are GMT -4. The time now is 09:24.