CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] The problem about transferring SOLIDWORKS 2D geometry file to ICEM (http://www.cfd-online.com/Forums/ansys-meshing/112816-problem-about-transferring-solidworks-2d-geometry-file-icem.html)

meshman February 5, 2013 23:38

The problem about transferring SOLIDWORKS 2D geometry file to ICEM
 
Hello, I'm a beginner using ICEM CFD & FLUENT ANSYS.
When I use ICEM to meshing, the geometry should be imported from CAD program. CAD program I use is SOLIDWORKS(ver.2010).
In case of 3D, the geometry is imported easily by 'workbench reader', but the 2D case does not work(although I add a plane to 2D geomtry).

(the error message)
Error: File not found
Current Coordinate system is global

Transferring 2D geometry doesn't work from Solidworks to ICEM, originally?


All times are GMT -4. The time now is 23:19.