CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Sharp TE wing with hemisphere tip (http://www.cfd-online.com/Forums/ansys-meshing/112928-sharp-te-wing-hemisphere-tip.html)

Far February 7, 2013 18:36

Sharp TE wing with hemisphere tip
 
Hey Guys :

Before that I have explained the procedure for making the mesh for 3d wing with different blocking techniques.

Now I am dealing with a bit difficult case than previous one. I am sure you would be interested in seeing the blocking approach for this case.
http://imageshack.us/a/img801/9638/a010v.jpg
http://imageshack.us/a/img547/6573/a011s.jpg
http://imageshack.us/a/img15/2553/a013v.jpg
http://imageshack.us/a/img844/5213/a009y.jpg


http://imageshack.us/a/img13/1937/a001kv.jpg
http://imageshack.us/a/img715/8517/a002x.jpg
http://imageshack.us/a/img20/3918/a004yen.jpg
http://imageshack.us/a/img18/4631/a005w.jpg
http://imageshack.us/a/img7/2049/a006qm.jpg
http://imageshack.us/a/img716/6342/a007c.jpg

Far February 7, 2013 18:44

Tip region
 
http://imageshack.us/a/img687/7094/a014r.jpg
http://imageshack.us/a/img850/1435/a015j.jpg
http://img201.imageshack.us/img201/9831/a016s.jpg


All times are GMT -4. The time now is 14:38.