CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ICEM] Boundary condition problem in 2d mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 8, 2013, 11:52
Post Boundary condition problem in 2d mesh
  #1
Member
 
Arun
Join Date: Mar 2012
Location: Vellore,TN,India
Posts: 35
Rep Power: 5
arunintn is on a distinguished road
hi All,
I made a 2d structured mesh in ICEM. I just went through tutorial and youtube video by Simon. I got everything done but when i import the mesh file. It not showing the mesh.

In the dialog box it say:
Building...
mesh
Removing 97260 unreferenced faces, zone 12.
Removing 149 unreferenced faces, zone 14.
Removing 99 unreferenced faces, zone 15.
Removing 654 unreferenced faces, zone 16.

Warning: Number of nodes read (49575) does not match number referenced (0).
Resetting counter to match the number referenced.

Warning: non-positive volumes exist.

materials,
interface,
domains,
zones,
Skipping zone wall (not referenced by grid).
Skipping zone inlet (not referenced by grid).
Skipping zone outlet (not referenced by grid).
Skipping zone airfoil (not referenced by grid).
Skipping zone int_ff (not referenced by grid).
Skipping zone ff (not referenced by grid).
Done.

I like to know what i need to do more. And where is the mistake i have done. I tried for 5 time so far
arunintn is offline   Reply With Quote

Old   February 8, 2013, 14:58
Default
  #2
Super Moderator
 
diamondx's Avatar
 
Ghazlani M. Ali
Join Date: May 2011
Location: Canada
Posts: 1,291
Blog Entries: 23
Rep Power: 20
diamondx will become famous soon enough
make sure fluid is assigned fluid in the boundary condition. and no curve is forgotten. just re-do it, it happens to me until i realize i forget i basic step...
__________________
Regards,
New to ICEM CFD, try this document --> http://goo.gl/G2gkE
Ali
diamondx is offline   Reply With Quote

Old   February 8, 2013, 15:52
Default
  #3
Member
 
Arun
Join Date: Mar 2012
Location: Vellore,TN,India
Posts: 35
Rep Power: 5
arunintn is on a distinguished road
Quote:
Originally Posted by diamondx View Post
make sure fluid is assigned fluid in the boundary condition. and no curve is forgotten. just re-do it, it happens to me until i realize i forget i basic step...
Thanks Ali.. you are correct about the fluid.. i'll redo again but i think i need to check the boundary settings well before going to mesh.. i almost wasted two days i'll update soon after i finish the grid is it working or not.
arunintn is offline   Reply With Quote

Old   February 8, 2013, 16:19
Default
  #4
Super Moderator
 
diamondx's Avatar
 
Ghazlani M. Ali
Join Date: May 2011
Location: Canada
Posts: 1,291
Blog Entries: 23
Rep Power: 20
diamondx will become famous soon enough
that's not wasting, it's called learning. later you will realize it
__________________
Regards,
New to ICEM CFD, try this document --> http://goo.gl/G2gkE
Ali
diamondx is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with "symmetryPlanne" boundary condition fcuevas OpenFOAM Running, Solving & CFD 1 March 14, 2012 06:07
(Heattransfer) Temperature boundary condition problem suitup OpenFOAM Bugs 15 October 14, 2010 22:18
Transient outlet boundary condition problem jwillie2000 CFX 1 December 7, 2009 18:07
Dynamic Mesh & Symmetry boundary condition Matt3o FLUENT 0 January 27, 2006 11:07
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 16:55


All times are GMT -4. The time now is 13:00.