CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ICEM] Edge control does not affect mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 25, 2013, 23:30
Default Edge control does not affect mesh
  #1
mgu
New Member
 
Mingyao Gu
Join Date: Jan 2012
Posts: 5
Rep Power: 5
mgu is on a distinguished road
I have created a geometry that resembles a curved pipe in Design Modeler and blocked it in ICEM. The problem is that the coarse mesh automatically generated could not be refined no matter how I modified the edge control (i.e. more nodes, parallel edges, etc). It seems that I am missing something fundamental. Could you point out to me what went wrong? Many thanks!

mgu
mgu is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Control mesh size in Cartesian lotus_blue ANSYS Meshing & Geometry 5 December 1, 2010 14:13
external flow with snappyHexMesh chelvistero OpenFOAM 11 January 15, 2010 20:43
Where's the singularity/mesh flaw? audrich FLUENT 3 August 4, 2009 01:07
increasing mesh quality is leading to poor convergence tippo CFX 2 May 5, 2009 10:55
ICEM - mesh near wing trailing edge Joao Lourenco CFX 5 August 30, 2007 17:20


All times are GMT -4. The time now is 20:31.