CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [DesignModeler] split into concentric cylinders (https://www.cfd-online.com/Forums/ansys-meshing/113751-split-into-concentric-cylinders.html)

kmgraju February 26, 2013 05:37

split into concentric cylinders
 
Dear friends

I have a solid cylinder . I would like to split concentric circular bodies . How do split multiple coaxial cylinders on it?


Thank you


Regards

Govind

Gweher March 5, 2013 15:10

1 Attachment(s)
There are different options you can use within DM. One way is to use the slice option using the following steps:

1) Select a sketching plan (in my case XY)
2) Draw a concentric circle, prescribe the diameter
3) Select Tool>Freeze (so you can use the slice option in step 4) )
4) Select Extrude and select the sketch from step 2), under "operation" tab select "Slice Material" instead of "Add Material" (default), hit generate

-> You will have 2 separate concentric cylinders, if you need multiples you can just draw more concentric circles in step 2) to generate the number of slices you want.


All times are GMT -4. The time now is 11:37.