CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [DesignModeler] Define flow path in design modeler (http://www.cfd-online.com/Forums/ansys-meshing/113764-define-flow-path-design-modeler.html)

m.r.vaghar February 26, 2013 07:18

Define flow path in design modeler
 
Hi all

I imported my geometry (steam blade) from SW into DM and also use Design Modeler, but i couldn't define flow path in DM. would u please tell me how can I define flow path for my geometry?

thanks alot

Far February 26, 2013 13:10

Send email id, I will mail you a tutorial with all relevant files.

m.r.vaghar February 28, 2013 10:55

hi

I sent my emial as private message for u.

thanks

Far February 28, 2013 12:28

Sent..... Courtesy by Simon

m.r.vaghar March 10, 2013 10:21

empty curve
 
Hi,


I've received the tutorial and did whatever is included in for my geometry, but I have some problems. First, if I didn't define "sketches for Define layer" in "Flowpath" part, I wouldn't be able do the next step "export Point" properly and if I defined this and pass "export point" step without error, I would find error like this in turbo grid:

"
TurboGrid Application Error

ERROR
Curve is empty

ERROR
Blade number is out of range.
"

Would you help me and tell me what I can do, please?


Thanks,

insanitymoe October 15, 2014 03:51

Hello Far!

I would very appreciate if you can send me your to tutorial via email. You will find my email in a private message.

Thanks!

Far October 16, 2014 11:20

https://meetings.webex.com/collabs/u...7gpXfX7je00000

spl March 2, 2015 06:08

Hi Far

Would it be possible for you to email me the tutorial as well, as I cannot access the link you posted. You will find my email in your private messages.

Thanks for your help.


All times are GMT -4. The time now is 11:42.