CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ICEM] Hex mesh for tangential junction

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 27, 2013, 02:17
Default Hex mesh for tangential junction
  #1
New Member
 
df
Join Date: Oct 2012
Posts: 4
Rep Power: 4
vansyle is on a distinguished road
Hi,
I am new to ICEM meshing. I would like to mesh a tangential junction of two pipe with different diameters. The small pipe is connected tangentially to large pipe in a inclined angle of 27 degree. I tried to use ICEM to generate hex mesh but it not successful. Everybody has idea to mesh it?
Thank you in advance
Attached Images
File Type: png Cyclone.PNG (40.7 KB, 25 views)
Attached Files
File Type: zip Cyclone.zip (5.8 KB, 3 views)
vansyle is offline   Reply With Quote

Old   February 27, 2013, 03:50
Default
  #2
Senior Member
 
AB
Join Date: Sep 2009
Location: France
Posts: 323
Rep Power: 12
BrolY will become famous soon enough
Hexa or tetra ?
Show some pics of what you have tried.
BrolY is offline   Reply With Quote

Old   February 27, 2013, 17:29
Default
  #3
New Member
 
df
Join Date: Oct 2012
Posts: 4
Rep Power: 4
vansyle is on a distinguished road
Hi BrolY
I use Hex mesh. I splited into 4 blocks as shown in (pic block) and associated the four edge to upper part of tangential curve (pic 1).
- Associated the vertical edge to left tangential curve and edge to right tangential curve (pic 2&3)
However, the upper face and front face is disappeared after re-meshed
Attached Images
File Type: jpg 0.jpg (43.4 KB, 18 views)
File Type: jpg 1.jpg (40.5 KB, 14 views)
File Type: jpg 2.jpg (38.6 KB, 14 views)
File Type: jpg 3.jpg (29.4 KB, 19 views)
File Type: jpg 4.jpg (80.1 KB, 25 views)
vansyle is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
--> FOAM FATAL ERROR: Trying to specify a boundary face A.A. OpenFOAM Native Meshers: blockMesh 26 November 26, 2014 11:38
SnappyHexMesh for internal Flow vishwa OpenFOAM Native Meshers: snappyHexMesh and Others 23 August 6, 2014 03:50
Mesh motion with Translation & Rotation Doginal CFX 2 January 12, 2014 07:21
Layers:problem with curvature giulio.topazio OpenFOAM Native Meshers: snappyHexMesh and Others 10 August 22, 2012 09:03
Need some help for my mesh generation Maxime Thomas OpenFOAM Native Meshers: blockMesh 1 August 18, 2012 06:05


All times are GMT -4. The time now is 12:28.