CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Scaling mesh (http://www.cfd-online.com/Forums/ansys-meshing/114036-scaling-mesh.html)

Spookz March 4, 2013 06:09

Scaling mesh
 
Hello,

is it possible to scale a mesh in ICEM CFD?

I have scaled up a geometry by factor 2 in CAD and want to use the mesh i used before for the smaller geometry just fitted to the ne bigger geometry.

Thanks for answer :)

Far March 4, 2013 08:22

Yes it is possible. Which meshing type you are asking? hexa or tetra?

Spookz March 4, 2013 09:45

It's a tetra mesh

diamondx March 4, 2013 12:05

edit mesh - transform mesh - scale ...

diamondx March 4, 2013 12:08

Quote:

Yes it is possible. Which meshing type you are asking? hexa or tetra?
the function works for both of them, why you asked ?

Far March 4, 2013 12:38

For Hexa I usually scale the blocks...

diamondx March 4, 2013 13:07

i recomment doing this in the unsctructured level. so you don't have to associate...

Spookz March 5, 2013 11:03

Thanks for the answers. Works perfectly


All times are GMT -4. The time now is 04:20.