CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Move the coordinate in ICEM (http://www.cfd-online.com/Forums/ansys-meshing/114351-move-coordinate-icem.html)

hz283 March 9, 2013 15:13

Move the coordinate in ICEM
 
Hi Everyone,

When I finished the mesh using ICEM, I found that the origin is not located in the expected place, but the relative scale of the computational domain is corrrect. So now I would like to move the coordinate system in ICEM. How can I do it in ICEM? :confused::confused: I know this will make all the coordinates changed.

Thank you in advance!

H

diamondx March 9, 2013 15:59

using edit mesh - transform - translate you mesh ...

hz283 March 9, 2013 16:06

Thank you so much!


Quote:

Originally Posted by diamondx (Post 412804)
using edit mesh - transform - translate you mesh ...



All times are GMT -4. The time now is 08:27.