CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [GAMBIT] Beginner Meshing Volume in Gambit (http://www.cfd-online.com/Forums/ansys-meshing/114665-beginner-meshing-volume-gambit.html)

spincfd March 15, 2013 06:46

Beginner Meshing Volume in Gambit
 
It is a 3D solid object inside a box where wind is flowing.

How to mesh these volume in Gambit?

Should I mesh its edge, face, or volume?

http://s1.postimage.org/k7r35bucf/meshing.png

-mAx- March 18, 2013 05:20

you need first to substract your object from your box.
Then you have 2 alternatives: "quick" mesh with tetra or nice hexa mesh, but it will ask more work


All times are GMT -4. The time now is 03:27.