CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [DesignModeler] DM- how to create Solid and Fluid _2D (http://www.cfd-online.com/Forums/ansys-meshing/114813-dm-how-create-solid-fluid-_2d.html)

ahvz March 18, 2013 08:20

DM- how to create Solid and Fluid _2D
 
Hi, How to create two different layer (2D) one is solid and another attached to this layer is Air (fluid). I have see only one body created for all geometry with its solid while is not the case that I expected
any help is welcome to my problem...
regards

diamondx March 18, 2013 10:43

in 2d, geometries are basically surfaces. use split faces. and rename them Fluid and sOLID.

ahvz March 18, 2013 11:38

Thank you Ali,

Now I have two bodies. how to connect this two together ? from one edge ? I tried "connect" option but there are not possible, let me know any ideas please...


All times are GMT -4. The time now is 21:38.