[ICEM] Problem with ICEM Script Meshing

asal · March 21, 2013, 07:13

Hello everybody!

I have a problem with ICEM Script which I want to use for mesh generation.

First, all the setting for the prism layers don't save in the Script file and every time, I have to assign them manually.
2nd, just the values which I set in Part Mesh Setup is saved in the Script. For instance the values 0.1 was set to a part already, when I set other values except this and click on apply button, then just the values which I set now is saved in the script and that 0.1 values ignored. so for the next time the script impose all the values except this one.
Any solution or idea about this issue?
Thanks.

P.S
Finally I have theses two files:
Sale.prism_params
replay_file.rpl

jthiakz · March 23, 2013, 15:30

you no need to keep this prism.param file. you can set all the parameters in script itself.
Tips
# when you record the script , do it sequentially.

asal · March 23, 2013, 19:11

Hello and thanks for your reply.

But why the Prism setting did not save in the script?! I try it several time, but I got the same result! I did everything sequentially.

March 21, 2013, 07:13	Problem with ICEM Script Meshing	#1
asal Senior Member Astio Lamar Join Date: May 2012 Location: Pipe Posts: 186 Rep Power: 13	Hello everybody! I have a problem with ICEM Script which I want to use for mesh generation. First, all the setting for the prism layers don't save in the Script file and every time, I have to assign them manually. 2nd, just the values which I set in Part Mesh Setup is saved in the Script. For instance the values 0.1 was set to a part already, when I set other values except this and click on apply button, then just the values which I set now is saved in the script and that 0.1 values ignored. so for the next time the script impose all the values except this one. Any solution or idea about this issue? Thanks. P.S Finally I have theses two files: Sale.prism_params replay_file.rpl Last edited by asal; March 22, 2013 at 09:33.

March 23, 2013, 15:30	ICEM Script error	#2
jthiakz Member Thiagu Join Date: Oct 2012 Location: India Posts: 60 Rep Power: 13	you no need to keep this prism.param file. you can set all the parameters in script itself. Tips # when you record the script , do it sequentially.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Meshing problem in Formula one	Far	ANSYS Meshing & Geometry	113	April 23, 2013 12:36
[ICEM] Meshing problem with ICEM	aylalisa	ANSYS Meshing & Geometry	21	January 22, 2013 17:22
[ANSYS Meshing] Meshing problem using ICEM CFD	cgpa4	ANSYS Meshing & Geometry	2	November 4, 2012 12:22
[ICEM] Meshing problem from ICEM CFD to Fluent	cfdonlinederafa	ANSYS Meshing & Geometry	2	September 21, 2010 16:16
ICEM meshing problem	Forrest	CFX	4	May 25, 2005 18:37

March 23, 2013, 19:11		#3
asal Senior Member Astio Lamar Join Date: May 2012 Location: Pipe Posts: 186 Rep Power: 13	Hello and thanks for your reply. But why the Prism setting did not save in the script?! I try it several time, but I got the same result! I did everything sequentially.