CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ICEM] Removing double edge

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 30, 2013, 18:59
Default Removing double edge
  #1
New Member
 
Papis
Join Date: Dec 2010
Posts: 25
Rep Power: 6
papis is on a distinguished road
Hi to all,

I have the following problem:

1) I import a plot3d mesh in ICEM.The mesh is ok

2)I split the mesh to parts to create boundary conditions but I realize that there is wake line (double line is something usual in structured meshes).

Is there a way to automatically remove the one line so I can use interior boundary condition?(btw the Output is fluent v6 mesh and there is no wake boundary condition.)
By double line it is implied that there exist double nodes as well.

Also is it possible when using an imported mesh to assign periodic boundary conditions?I Know how to build up periodic elements when meshing from scratch in ICEM but I cannot find anything close to
applying periodic boundaries to an imported mesh.Any information would be much appreciated

Thank you very much

Last edited by papis; March 30, 2013 at 21:08.
papis is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Continuing User Defined Real Gas Model issues aeroman FLUENT 5 May 1, 2015 02:57
how to set periodic boundary conditions Ganesh FLUENT 13 January 22, 2014 05:11
Missing math.h header Travis FLUENT 4 January 15, 2009 12:48
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55
REAL GAS UDF brian FLUENT 6 September 11, 2006 08:23


All times are GMT -4. The time now is 13:23.