CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Problem with meshing around the blunt nose of a 3D cone shape (http://www.cfd-online.com/Forums/ansys-meshing/115649-problem-meshing-around-blunt-nose-3d-cone-shape.html)

D-willism April 4, 2013 00:24

Problem with meshing around the blunt nose of a 3D cone shape
 
5 Attachment(s)
Hi, guys

I got stuck with the meshing a half of a 3D blunt nose cone shape using ICEM. My method is basically to have a few O-grids surrounding the half cone shape and this ended up with poor grid quality around the nose region. As I am new to ICEM, I've been working on this for weeks. Could you guys please help me out? I've attached my files with the post.

Best Regards


All times are GMT -4. The time now is 08:02.