CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [GAMBIT] 3d mesh import from solidwork to gambit (http://www.cfd-online.com/Forums/ansys-meshing/115780-3d-mesh-import-solidwork-gambit.html)

hamednoordoost@yahoo.com April 6, 2013 13:11

3d mesh import from solidwork to gambit
 
1 Attachment(s)
hi
i have a 3d flange that have complex geomety so i draw it on solid work then import it as parasoild to gambit. flange need to be analysied with free convection. i have many problems first of all need a manual or traning or some hint to start meshing complex geometry. i can mesh a simplified model and i solve it but problem is many volume and faces. does any one have some traning or manual with gambit for complex geometry.
a picture of flange like model analyzed with COMSOL are attached.
thanks

-mAx- April 8, 2013 01:53

http://aerojet.engr.ucdavis.edu/gambithelp/index.htm

What are your problems?

hamednoordoost@yahoo.com April 8, 2013 08:46

need a tutorial for mesh a complex geometry with out side flow

-mAx- April 8, 2013 08:55

follow the link I gave you


All times are GMT -4. The time now is 10:56.