CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [DesignModeler] importing geometry from Solidworks to DM by.IGS (http://www.cfd-online.com/Forums/ansys-meshing/115809-importing-geometry-solidworks-dm-igs.html)

ahvz April 7, 2013 12:34

importing geometry from Solidworks to DM by.IGS
 
Hi,
I have an assembly file of my geometry from solidworks. when I save as .IGS file then import into DM the material still Solid wile I defined solid and fluid in solidwork. whereas, I can change it within DM but I must have import geometry with predefined solid and fluid by solidworks.
Where is my mistake ?

baratymm April 7, 2013 12:50

Hi
1-you can define geometry type in DM easily.
2-you can test Save As STEP type.
I suggest No 1.
Thanks

ahvz April 7, 2013 12:59

thank you for reply,

I want to have this properties before importing to the DM. whereas, I defined solid and fluid for each part of assembly but I cant understand the reason why doesn't change in DM and still defied solid for two cases...

baratymm April 7, 2013 14:58

i think your license not work properly (may be).
Are you Save as Step format and export to the DM?

ahvz April 7, 2013 15:22

its work now:)

thank you!


All times are GMT -4. The time now is 09:52.