|
[Sponsors] |
April 20, 2013, 04:13 |
Edges in Merge Blocks tool
|
#1 |
Senior Member
Javi
Join Date: Jan 2013
Posts: 276
Rep Power: 16 |
Hi guys,
First of all I hope you have great weekend! I open this thread because I have some doubts with block edges when I use "merge blocks" tool. Here I present a simple example. I have an O-grid block (picture 1). Now, I want to merge this blocks (picture 2). I do this and then I get (picture 3). I would like to get a block like I underlined in red color. And now I suppose that you guys are wondering why am i asking for this. Iīm making this question because I thought that if I get a block like in the last one in pdf file I would have a good quality in the trailing edge. I did it but it didnīt work. Anyway this post is to know about the edges in "merge blocks" tool. I hope that I've explained it good. Thanks guys! |
|
April 23, 2013, 10:58 |
|
#3 |
Senior Member
Javi
Join Date: Jan 2013
Posts: 276
Rep Power: 16 |
Youīre right Diamondx. It was a mistake, should be "collapse block". Anyway... do you know how to get a block like red underlined? Or... is it not possible?
|
|
April 23, 2013, 11:10 |
|
#5 |
Senior Member
Javi
Join Date: Jan 2013
Posts: 276
Rep Power: 16 |
I think you don't understand me or I'm not explained well. I want a block like this (I think maybe itīs not possible).
|
|
April 23, 2013, 11:27 |
|
#7 |
Senior Member
Javi
Join Date: Jan 2013
Posts: 276
Rep Power: 16 |
Thanks Diamondx. I think itīs not possible too.. but I had to ask to ensure.
|
|
April 24, 2013, 07:11 |
|
#9 |
Senior Member
Javi
Join Date: Jan 2013
Posts: 276
Rep Power: 16 |
Thanks Far. Iīm not refering a L-Block. What I wanted to do itīs something impossible.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Commercial meshers] converting Fluent mesh to openfoam standard mesh | deepesh | OpenFOAM Meshing & Mesh Conversion | 31 | March 29, 2017 05:59 |
dsmcInitialise - dsmcFoam | archymedes | OpenFOAM Pre-Processing | 94 | July 15, 2016 16:14 |
[snappyHexMesh] SnappyHexMesh for internal Flow | vishwa | OpenFOAM Meshing & Mesh Conversion | 24 | June 27, 2016 08:54 |
[snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 09:38 |
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 21:11 |