CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [Workbench] Named selection for internal face not appearing in CFX-Pre (http://www.cfd-online.com/Forums/ansys-meshing/116516-named-selection-internal-face-not-appearing-cfx-pre.html)

francis1 April 21, 2013 10:22

Named selection for internal face not appearing in CFX-Pre
 
Hi everyone,

I face a problem of selecting the internal face in CFX-Pre although I have named the internal face in Workbench meshing. I am working on 2D simulation.The geometry that I have is a series of 5 rectangular blocks (one part 5 bodies) which are connected to each other, thus, there is one inlet face, one outlet face and 4 internal faces. Only the inlet and outlet face are appearing in CFX-Pre, but the other 4 internal faces do not appear in CFX-Pre although they are named in Workbench meshing. Could I ask a favor how to ensure the internal face appearing in CFX-Pre?

Any help on this is much appreciated. Thanks.

Cheers
Francis


All times are GMT -4. The time now is 20:05.