CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [GAMBIT] cross flow (http://www.cfd-online.com/Forums/ansys-meshing/116731-cross-flow.html)

NORAHAYET April 24, 2013 04:34

cross flow
 
1 Attachment(s)
Hi,
Can anyone tell me how to mesh geometry just giving me indications
thank you

-mAx- April 24, 2013 06:16

full tetra?
full hexa?
hybrid?
do want to get your mesh quickly or do you have time to spend for achieving something nice with hexa?

NORAHAYET April 24, 2013 12:41

re cross flow
 
hi max,
I managed to make a mesh to a single cylinder and I find difficulty to mesh the secondary cylinder above it or intersect. I send you a file to see how I did the first mesh.:confused:

NORAHAYET April 24, 2013 12:51

re cross flow
 
2 Attachment(s)
hi max,
I managed to make a mesh to a single cylinder and I find difficulty to mesh the secondary cylinder above it or intersect. I send you a file to see how I did the first mesh.

NORAHAYET April 24, 2013 16:23

re re cross flow
 
hi
i prefere mesh the geometry with hexa please give me just the indications.

-mAx- April 25, 2013 01:09

yes pipe intersections with hexa (and gambit) always ask some work.
get inspired from this tutorial: http://aerojet.engr.ucdavis.edu/gamb...guide/tg03.htm

NORAHAYET April 25, 2013 01:58

re re cross flow
 
thank you max:o


All times are GMT -4. The time now is 12:14.