CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ANSYS Meshing] Defined element number for 2D mesh (http://www.cfd-online.com/Forums/ansys-meshing/117539-defined-element-number-2d-mesh.html)

TomM May 10, 2013 07:28

Defined element number for 2D mesh
 
Hey guys,

I created a 2D mesh with ANSYS and I would like to know if its possible to get a defined number of elements for each of the two edges. The geometry is rectangular, 88,9 x 63,6 mm and I would like to have 42 x 32 elements.


http://s14.directupload.net/file/d/3...5e3nmt_jpg.htm

Thanks in advance

evcelica May 10, 2013 16:56

INSERT >> SIZING >> pick edges >> NUMBER OF DIVISIONS

TomM May 11, 2013 12:49

Great!!! Thanks a lot!


All times are GMT -4. The time now is 13:18.