CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ANSYS Meshing] cut plane visualization (http://www.cfd-online.com/Forums/ansys-meshing/117737-cut-plane-visualization.html)

oewnce932c May 14, 2013 10:23

cut plane visualization
 
1 Attachment(s)
Hi all!
found this thread about ICEM.
But now i am using Meshing tool, and asking me.
Is there some option as in ICEM like "Cut Planes".
Idea is to see the boundary mesh for example on the ship hull. At the moment i can just see the border mesh.
Great thanks!

jrunsten May 15, 2013 01:56

http://i.imgur.com/KORPm1E.png

oewnce932c May 15, 2013 08:07

thanks jrunsten!
that works fine!
in section planes panel is possible to turn on/off different "slice planes"
very easy and useful!
http://s1.directupload.net/images/130515/4iwmoqef.png

In a boundary layear it looks good. But unstructured mesh looks for me, that cuted cells are projected on the cut plane. Is it possible not to do this?
here a screenshot
http://s7.directupload.net/images/130515/tf8aekqw.png

jrunsten May 15, 2013 10:20

Yeah. With a plane active, click on the little pyramid icon. This will turn on whole elements.
http://i.imgur.com/dKjajWT.png

oewnce932c May 15, 2013 12:16

1 Attachment(s)
thanks again!
that works fine:)
one thing is to keep Mesh in the programm tree active.
http://s7.directupload.net/images/130515/mjn7l62h.png

looks great! okay need to add boundary layer:)


All times are GMT -4. The time now is 06:02.