CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ICEM] Smoothing before merge meshes

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 20, 2013, 11:30
Default Smoothing before merge meshes
  #1
Senior Member
 
Javi
Join Date: Jan 2013
Posts: 190
Rep Power: 5
FJSJ is on a distinguished road
Hi guys,

Ive merged 2 meshes; the first one is hexas mesh and the second one is a tetra mesh. I have 3x3x3 det. quality over 0.5 in hexa mesh and over 0.34 in tetra mesh. When I merge this two meshes I got a worse quality mesh. So.. my question is... Is it better smoothing meshes before merge them? Or... is better merge them and then smooth them. Or even more, is it better no smoothing?

Thank you guys!
FJSJ is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] merge meshes between hexa and prism jjz2013 ANSYS Meshing & Geometry 32 July 28, 2014 09:24
[ICEM] Merge meshes with internal wall BrolY ANSYS Meshing & Geometry 20 February 20, 2013 10:43
Merge meshes in Fluent benibear FLUENT 3 October 25, 2011 05:49
Merge 2 unstructured meshes vinc ANSYS Meshing & Geometry 0 May 19, 2011 16:14
[ICEM] merge two hexa meshes gajemon ANSYS Meshing & Geometry 1 January 29, 2011 19:49


All times are GMT -4. The time now is 03:35.