CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] match edge spacing (https://www.cfd-online.com/Forums/ansys-meshing/118501-match-edge-spacing.html)

LM4112 May 28, 2013 19:45
match edge spacing
 
1 Attachment(s)
Dear all,

I need to match the spacing on 1 edge with an other edge that is composed by 3 edges (I uploaded an image to clarify the situation). Do you know how to do it? Thanks in advance

Best regards

L.Metelli

Far May 29, 2013 10:19
you can use match control to do it. What is the problem?

LM4112 June 10, 2013 10:42
Quote:
Originally Posted by Far (Post 430762)
you can use match control to do it. What is the problem?
what is match control? I tried to use copy parameters and link bunching without success.

CHAYANIT September 5, 2018 09:53
Match edge spacing
 
I am using gmsh for meshing an airfoil.I am facing problem in edge space matching from one block to another.Can help me in this?

bluebase September 6, 2018 08:37
Chayanit,


well, this thread is regarding ICEM. And this thread is five years old. It's highly unlikely to receive help to your problem here.



i suggest you to open a new thread in https://www.cfd-online.com/Forums/op...-meshing-open/ and explain your problem in detail



Best regards,
Sebastian


All times are GMT -4. The time now is 10:36.