CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ICEM] Meshing a pipe with 6 inlets

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 29, 2013, 11:09
Default Meshing a pipe with 6 inlets
  #1
cs1
New Member
 
Join Date: Apr 2013
Posts: 1
Rep Power: 0
cs1 is on a distinguished road
Hey, i'm trying to mesh a Pipe with 6 injectors. The big injector ring will be put in the big pipe.
How do I mesh the 6 inlets and merge them with the big mesh of the pipe?
How is the strategy. I don't know how to proceed with the inlets.
Thanks for your help

http://666kb.com/i/cehm0dwlsjgjl7adm.jpg
cs1 is offline   Reply With Quote

Old   May 29, 2013, 12:53
Default
  #2
Senior Member
 
Matthias Voß
Join Date: Mar 2009
Location: Berlin, Germany
Posts: 449
Rep Power: 20
mvoss is on a distinguished road
cut out the sectors (one segment per inlet, 60deg each), cut 2x circumferential (r=50% and r=75%, with r being your local radius, and the inlet @ 62,5%) and add a ogrid around each inlet.

supposing your want to have a hex-mesh.

you can also just block one segment and create multiple copies (saves time, since all the settings a copied from master-->copy automatically)
mvoss is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Meshing the pipe . Pavelko ANSYS Meshing & Geometry 14 May 31, 2013 00:10
[GAMBIT] Problem in meshing a pipe within a cylinder l14766 ANSYS Meshing & Geometry 7 May 14, 2013 18:24
How to draw 2 Inlets in 3D pipe mariam.sara FLUENT 16 January 16, 2012 02:14
Meshing a pipe joint for OpenFoam--Hex or Tet???? nileshjrane OpenFOAM 4 August 14, 2010 06:38
Meshing of circular pipe in CFX-mesh Fatnes CFX 3 March 27, 2009 07:29


All times are GMT -4. The time now is 08:51.