CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   mesh generation for reactive distillation tray (http://www.cfd-online.com/Forums/ansys-meshing/118672-mesh-generation-reactive-distillation-tray.html)

Adila Anbreen June 1, 2013 06:01

mesh generation for reactive distillation tray
 
1 Attachment(s)
hello,
i am new to ansys fluent and working on it for my msc thesis.. i have geometry of reactive distillation tray column and now i want to mesh this plate but i am having error of "meshing process ran out of memory"
i have tried all meshing methods( automatic, patch conforming and patch independent) but same error with all methods.
can anyone help me to solve this meshing problem...
here is the geometry

diamondx June 3, 2013 09:22

you must have given a very very small size to yuur elements....give a bigger size

Adila Anbreen June 3, 2013 12:52

yup you are right..i solved it yesterday...default size was set to 0.0014 and when i set it to 0.014 it was solved and meshed easily...
anyways lot of thanks for your help....


All times are GMT -4. The time now is 06:42.