[DesignModeler] DM-how to create 1 part from 7 parts-7 bodies

ahvz · June 17, 2013, 14:41

In my case, I imported 7 parts-7 bodies into DM. when I am trying to convert the 7 parts to 1 part by "tools> form new part" , the form new part appears not active.

my geometry imported from solidworks also,

how to solve this ?

regards,

diamondx · June 17, 2013, 16:40

try boolean-» unite

ahvz · June 17, 2013, 16:49

Solved!

thanks

Maralady · June 18, 2013, 22:47

How can I do the opposite? I would like to create several parts from just one part, I want to create interfaces and different cell zones

diamondx · June 18, 2013, 22:56

You need to slice then... use the slice feature

Maralady · June 18, 2013, 22:58

It works for 2D geometries?

Maralady · June 18, 2013, 23:12

I was able to use the slice option, but I had to use the option lines from sketch to be able to then use slice with loops, is that ok? or I just made something wrong?

June 17, 2013, 14:41	DM-how to create 1 part from 7 parts-7 bodies	#1
ahvz Senior Member Moha Join Date: Mar 2013 Location: EU Posts: 103 Rep Power: 0	In my case, I imported 7 parts-7 bodies into DM. when I am trying to convert the 7 parts to 1 part by "tools> form new part" , the form new part appears not active. my geometry imported from solidworks also, how to solve this ? regards,

June 17, 2013, 16:40		#2
diamondx Super Moderator Ghazlani M. Ali Join Date: May 2011 Location: Tokyo, Japan Posts: 1,385 Blog Entries: 23 Rep Power: 28	try boolean-» unite __________________ Regards, New to ICEM CFD, try this document --> https://goo.gl/KAOIwm Ali

June 18, 2013, 22:56		#5
diamondx Super Moderator Ghazlani M. Ali Join Date: May 2011 Location: Tokyo, Japan Posts: 1,385 Blog Entries: 23 Rep Power: 28	You need to slice then... use the slice feature __________________ Regards, New to ICEM CFD, try this document --> https://goo.gl/KAOIwm Ali

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[DesignModeler] Can I keep some bodies freezed before meshing?	yahya	ANSYS Meshing & Geometry	4	December 3, 2012 11:32
How to create 2 separate Surface Bodies?	Matlab69	FLUENT	5	April 22, 2012 14:53
[ICEM] Fluent skips parts i create in icem	diamondx	ANSYS Meshing & Geometry	14	April 17, 2012 14:48
[ICEM] Unique Parts option	BrolY	ANSYS Meshing & Geometry	2	April 11, 2011 03:33
Where's the singularity/mesh flaw?	audrich	FLUENT	3	August 4, 2009 01:07

June 17, 2013, 16:49		#3
ahvz Senior Member Moha Join Date: Mar 2013 Location: EU Posts: 103 Rep Power: 0	Solved! thanks

June 18, 2013, 22:47		#4
Maralady Member Arthur Loginow Join Date: Aug 2012 Posts: 99 Rep Power: 13	How can I do the opposite? I would like to create several parts from just one part, I want to create interfaces and different cell zones

June 18, 2013, 22:58		#6
Maralady Member Arthur Loginow Join Date: Aug 2012 Posts: 99 Rep Power: 13	It works for 2D geometries?

June 18, 2013, 23:12		#7
Maralady Member Arthur Loginow Join Date: Aug 2012 Posts: 99 Rep Power: 13	I was able to use the slice option, but I had to use the option lines from sketch to be able to then use slice with loops, is that ok? or I just made something wrong?