|
[Sponsors] |
June 19, 2013, 09:54 |
meshing problem
|
#1 |
Senior Member
|
hi. I'm trying to simulate an ogee weir in a channel. I want to use hexa dominant mesh in the model. but when I run it. something goes wrong and icem can't generate volume mesh. what is the problem?
|
|
June 20, 2013, 02:31 |
|
#2 |
Senior Member
|
I tried another method. I used surface mesh after that I ran hexa dominant with option of existing mesh. but the result was same as before. this error was showed in both case:
Running: "D:/Program Files/ANSYS Inc/v140/icemcfd/win64_amd/icemcfd/hex_dom" __hexdom_surface.uns __hexdom_volume.uns BODY Program is running: pid = 3592 E07 Init: element 1 has measure 0.0 Application is finished. Error: couldn't generate proper mesh Performing a mesh flood fill... element containing material point BODY.1 was not found Done mesh flood fill please help me! |
|
June 20, 2013, 11:18 |
|
#3 |
Senior Member
|
any suggestion?
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem with querying the meshing database in CFX-Pre | ashtonJ | CFX | 18 | April 18, 2023 23:49 |
[Other] Hex meshing problem DM12 | patrick | ANSYS Meshing & Geometry | 7 | January 9, 2015 07:21 |
Strange ANSYS Meshing 13.0 Problem | brunob | ANSYS Meshing & Geometry | 3 | June 21, 2011 20:03 |
Meshing problem in GAMBIT | Vidya Raja | FLUENT | 0 | May 20, 2006 23:31 |
GAMBIT meshing problem | Gauthier Lambert | Main CFD Forum | 1 | August 3, 2000 09:22 |