CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ANSYS Meshing] mesh file exporter failed

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 26, 2013, 10:34
Default mesh file exporter failed
  #1
New Member
 
Sabine Müller
Join Date: Jun 2013
Location: Germany
Posts: 7
Rep Power: 4
dulka90 is on a distinguished road
Hello,

i am new here ... I have problems with exporting my mesh (1507805 nodes, 6841086 elements). I can generate it with out any problems in the mesher (Fluent ambient, Ansys Mesher). Even the green checkmark appears. But then when i go back to the work bench it tells me to update my project especially to update my mesh. But when i do that the problem beginns. It then tells me:

ERROR! Update failed for the mesh component in the [project]. Error updating cell mesh in system [project]. View the messages in the Meshing editor for more details.

and:

INFORMATIONAL: The Geometry component in [project] requires user input before it can be updated


and when i go to the mesher to whatch the message it tells me that:

The mesh file exporter failed during translation. Please send your data to your support provider.


Can somebody help me to solve the problem? I never had that before ...
Has someone any idea what could be wrong?

Thanks in advance
Sabine
dulka90 is offline   Reply With Quote

Old   November 20, 2013, 13:43
Default Error in mesh translation
  #2
New Member
 
Maja
Join Date: Nov 2013
Posts: 5
Rep Power: 3
Majapee is on a distinguished road
Hi, I just read your post now. Were you able to solve this problem? I encounter similar error in my work and I would like to know how you were able to solve the problem if you have done so. Thanks
Majapee is offline   Reply With Quote

Old   November 20, 2013, 14:34
Default
  #3
New Member
 
Sabine Müller
Join Date: Jun 2013
Location: Germany
Posts: 7
Rep Power: 4
dulka90 is on a distinguished road
Hello,

i have to tell you, that i couldnt really solve the problem.

In my project it seems to be that the "mesh file exporter" has problems with the connections. So i checked every connection for plausibility. But still had the Problem. Then i deleted every Connection and tried it. Then (strangly) it works.
But then you have the Problem Fluent cant calculate any conductive heat transfer. So if you only need the behaviour of the fluid try to delete the connections. If you need the heat transfer too i cant really help ...

Maybe you should look up any other ways of connecting ... or really ask some experts ...

SORRY, i know that isnt a satisfactory solution.

But if you find a way, please let me know

My Bachelor thesis is over, and i passed it with 1,3 ... but as you know you never stop learning ^^
dulka90 is offline   Reply With Quote

Old   November 21, 2013, 08:05
Default
  #4
New Member
 
Maja
Join Date: Nov 2013
Posts: 5
Rep Power: 3
Majapee is on a distinguished road
Thanks for your reply. I need to study both heat transfer and fluid flow in my work so deleting the connections may not be a good option for me.

I will appreciate it if people in this forum who have encountered similar problem or have idea of how I can solve this problem can be of help, I really need to solve this problem as quick as I can.
Majapee is offline   Reply With Quote

Old   March 11, 2015, 06:44
Default
  #5
Senior Member
 
amin.z's Avatar
 
Amin
Join Date: Oct 2013
Location: Somewhere on Earth
Posts: 307
Rep Power: 5
amin.z is on a distinguished road
hi friends
finally did you found any solution for this problem!? I have same issue...
__________________
Best regards,
Amin
amin.z is offline   Reply With Quote

Old   March 13, 2015, 08:01
Default
  #6
New Member
 
Maja
Join Date: Nov 2013
Posts: 5
Rep Power: 3
Majapee is on a distinguished road
Hi, I didn't find a solution to the problem.

cheers!
Majapee is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ANSYS Meshing] The mesh file exporter failed during translation. foolboy007 ANSYS Meshing & Geometry 6 April 14, 2015 11:16
Error bulding swak4Foam sfigato OpenFOAM Installation 18 August 22, 2013 12:41
swak4Foam-groovyBC build problem zxj160 OpenFOAM 18 July 30, 2013 13:14
The mesh file exporter failed during translation. foolboy007 ANSYS 0 November 2, 2012 15:54
DxFoam reader update hjasak OpenFOAM Post-Processing 69 April 24, 2008 01:24


All times are GMT -4. The time now is 20:42.