[ICEM] Replay

chrive · April 5, 2013, 10:09

Hello guys,
i'm working with the icem replay control to mesh several 2d airfoils.
to create an output file i'm using the command "ic_create_output".
Is there an argument to dismiss the question about saving the project and the .fbc file? I don't want to save them.
chrive

Sandro23 · May 22, 2013, 16:50

Hi,

I'm working a script to generate mesh automatically and I've the same problem with the "ic_create_output". Did you find a solution about not saving the .fbc file ?

karamiag · July 1, 2013, 08:10

I have solved in this way for a 2d mesh:
ic_save_project_file {/absolute-path/file.prj}
ic_boco_save /absolute-path/file.fbc
ic_save_unstruct /absolute-path/file.uns
ic_exec {/usr/local/ansys_inc/v145/icemcfd/linux64_amd/icemcfd/output-interfaces/fluent6} -dom "/absolute-path/file.uns" -b "/absolute-path/file.fbc" -dim2d "./file.msh"

April 5, 2013, 10:09	Replay	#1
chrive New Member Christoph Join Date: Apr 2013 Posts: 1 Rep Power: 0	Hello guys, i'm working with the icem replay control to mesh several 2d airfoils. to create an output file i'm using the command "ic_create_output". Is there an argument to dismiss the question about saving the project and the .fbc file? I don't want to save them. chrive

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Replay control - save picture	zboud	ANSYS Meshing & Geometry	13	June 16, 2016 14:33
ICEM CFD Replay Remeshing	EvaS	CFX	1	December 19, 2012 19:30
A problem of simulation using ICEM CFD Replay Remeshing	fluid vertical turbine	CFX	0	April 4, 2012 07:46
User defined remeshing vs ICEM CFD replay remeshing	vmlxb6	CFX	0	October 18, 2010 01:58
Any success with rigid body solver and ICEM replay remeshing?	siw	CFX	1	August 21, 2009 02:17

May 22, 2013, 16:50		#2
Sandro23 New Member Antoine Join Date: Mar 2013 Location: Montreal Posts: 6 Rep Power: 13	Hi, I'm working a script to generate mesh automatically and I've the same problem with the "ic_create_output". Did you find a solution about not saving the .fbc file ?

July 1, 2013, 08:10		#3
karamiag Member Giovanni Caramia Join Date: Mar 2009 Location: Bari, ITALY Posts: 58 Rep Power: 17	I have solved in this way for a 2d mesh: ic_save_project_file {/absolute-path/file.prj} ic_boco_save /absolute-path/file.fbc ic_save_unstruct /absolute-path/file.uns ic_exec {/usr/local/ansys_inc/v145/icemcfd/linux64_amd/icemcfd/output-interfaces/fluent6} -dom "/absolute-path/file.uns" -b "/absolute-path/file.fbc" -dim2d "./file.msh"