CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ANSYS Meshing] Import Mesh from CFX-Solve to OpenFOAM (http://www.cfd-online.com/Forums/ansys-meshing/121302-import-mesh-cfx-solve-openfoam.html)

A.Stamatopol July 25, 2013 11:01

Import Mesh from CFX-Solve to OpenFOAM
 
Hello,

I want to import my mesh files in order to simulate a complete cycle of an ICE in OpenFOAM. I obtained my Geometries with Icem, after running the .rpl files written with cfx.
The obtained .msh files were the imported in CFX-Solve and a .def file was defined.
At the end I obtained .res and .trn files, which I don't know how to use.
I need more meshes for each of my 4 geometry positions, that is why I can't import the geometry directly from icem.
Please give me an advice how to transform my files (.res; and .trn) into geo or msh files that I can use.

Best regards,

Andrei

diamondx July 25, 2013 11:08

you should also try opening a thread in the openFOAM section of the forum...


All times are GMT -4. The time now is 18:01.