CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Section View in ICEM (Easy Question)!!! (https://www.cfd-online.com/Forums/ansys-meshing/121323-section-view-icem-easy-question.html)

abuono1 July 25, 2013 19:08
Section View in ICEM (Easy Question)!!!
 
This is my first time posting a question to this forum, so I'm sorry if its wrong in any way. So, in ANSYS Meshing I know how to slice the mesh to see a cross section view of the mesh gradient around a tool body. However, in ICEM I haven't found that tool to allow me to be able to do the same thing I can in ANSYS Meshing. So I was wondering if any of you guys know how to do this in ICEM???

diamondx July 26, 2013 00:30
On your left you have the tree for "geometry", "mesh", "blocking". Right button on mesh -> cut plane -> Show cut plane

abuono1 July 26, 2013 14:22
Thank you so much, I figured it out!

itsme_kit March 20, 2014 10:04
1 Attachment(s)
Quote:
Originally Posted by diamondx (Post 442058)
On your left you have the tree for "geometry", "mesh", "blocking". Right button on mesh -> cut plane -> Show cut plane
Hi

Why my view of cut-plane like this? see attached pic

Thanks in advance

Far March 20, 2014 11:29
Quote:
Originally Posted by itsme_kit (Post 481122)
Hi

Why my view of cut-plane like this? see attached pic

Thanks in advance
did you delete the block ?

diamondx March 21, 2014 14:44
check volume element too...


All times are GMT -4. The time now is 11:41.