Icem mesh error
I have created my mesh in ICEM and also I have checked the quality and did the smoothing in ICEM.
While checking the mesh it asked me tons of errors reagding unattached edges and etc. I had three options, ignore, create subset or fix it. (The last one only for some of the errors)
I tried either of them, after exporting the mesh in FLUENT, I faced with the following terms:
1. 38 cells have only faces...
2. Check mesh failed
3. check verbosity
Could you please help me...
Thanks in advance
Can you attach a photo or the geometry file if this ok with you.
I have attached some helpful pictures.
Thanks in advance,
The pictures can show how the errors look but sure geometry will be needed to check it ,if you are fine with that?
Sorry for the basic question but have you choose the material points for your model or not?
and how did you generate the mesh ?
The errors occured in surface or volume mesh check?
Thanks for your reply. the errors occured in volume mesh check.
I used Robust, then Quick and then create the prisms
|All times are GMT -4. The time now is 13:14.|