CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Blocking in icem (http://www.cfd-online.com/Forums/ansys-meshing/123024-blocking-icem.html)

rijas September 3, 2013 02:41

Blocking in icem
 
1 Attachment(s)
Hii
I would like to mesh an airfoil and hole near the airfoil using icem cfd.Could any one suggest me how the blocking should be done.I am attaching the pic of my domain .Thanks in advance

chirag.palan1987@gmail.co September 3, 2013 03:52

icem-cfd
 
can any body tell where the caching for icem cfd is available in chennai or banglore.>
i am preparing for my masters and i want to learn icem cfd before i join.
please be helpful.

blaze92 September 10, 2013 08:59

Quote:

Originally Posted by rijas (Post 449483)
Hii
I would like to mesh an airfoil and hole near the airfoil using icem cfd.Could any one suggest me how the blocking should be done.I am attaching the pic of my domain .Thanks in advance

The tutorials in ICEM should be able to help you with the blocking, look at 'Hexa Mesh Generation for a Pipe with Embedded Blade' and 'Hexa Mesh Generation for an Elbow Part'. They should give you a good sort of idea where to go with blocking.


All times are GMT -4. The time now is 06:41.