|September 23, 2013, 08:35||
Meshing over rectangular slab with different material conducitivity material embedded
Join Date: Jul 2013
Posts: 4Rep Power: 4
I recently started working on ICEM CFD. I don't have much knowledge except the tutorial problem. I am trying to mesh a rectangular geometry having three small rectangle of different thermal conductivity inside it (Figure 1 attached, with dimensions in meter) Figure 1.jpg.
I made the geometry but i am not sure whether different material property can be applied there or not. I totally struck now and don't know how to create edges and associate them with the curves in the geometry and how to process for the particular mesh shown in Figure 1.
Please provide me your able guidance.
|September 24, 2013, 11:06||
Join Date: Mar 2009
Location: Ann Arbor, MI
Blog Entries: 1Rep Power: 35
I have not looked at your example, but if you don't know how to create edges (split block) or associate edges to curves, you definitely need to spend more time with the tutorials before we can help you on CFD-Online...
As for changing the material in certain blocks, that is just a matter of right clicking on the parts branch of the tree to create a new part. Change the option to Create Blocking Material, and select the blocks to assign a new part name to... Hit apply.
|icem, rectangular, thermal coductivity|
|Thread||Thread Starter||Forum||Replies||Last Post|
|error message||cuteapathy||CFX||14||March 20, 2012 07:45|
|Constant velocity of the material||Sas||CFX||15||July 13, 2010 08:56|
|mass flow in is not equal to mass flow out||saii||CFX||2||September 18, 2009 08:07|
|Temperature profiles for rectangular slab||jothiek||Main CFD Forum||2||June 23, 2009 14:47|
|Two-Phase Buoyant Flow Issue||Miguel Baritto||CFX||4||August 31, 2006 12:02|