CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ICEM] Best format to write the meshfile.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 19, 2013, 15:22
Default Best format to write the meshfile.
  #1
Member
 
Ashwani
Join Date: Sep 2013
Location: Hyderabad
Posts: 88
Rep Power: 3
AshwaniAssam is on a distinguished road
Which is the best format to write the mesh file to be read in the personal code for structured mesh using ICEM?

We are using CGNS format at present, but I having many issues with even reading mesh for common problems, generated by ICEM. These problems are like, 3d airfoil, 3d cylinder.

So, we are thinking either to use some other format. Or, if any particular procedures has to be followed for writing the cgns file using ICEM.
Ours is structured solver and we can read CGNS 2.4 version.
Please if any body can help.
AshwaniAssam is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Helyx-OS (GUI for SnappyHexMesh elvis OpenFOAM Native Meshers: snappyHexMesh and Others 176 July 10, 2015 16:50
Write data file into a hdf5 format using c++ rahulsng Main CFD Forum 0 January 23, 2012 06:32
output or write of tensorField in ascii format in openFoam safre OpenFOAM Installation 0 November 7, 2011 09:08
mesh file for flow over a circular cylinder Ardalan Main CFD Forum 6 April 17, 2010 23:40
HashTable Binary write format deepsterblue OpenFOAM Bugs 1 March 16, 2010 11:03


All times are GMT -4. The time now is 01:28.