CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [TurboGrid] Ansys Turbo Grid: Import Geometry Problems (http://www.cfd-online.com/Forums/ansys-meshing/125171-ansys-turbo-grid-import-geometry-problems.html)

Polito October 21, 2013 04:25

Ansys Turbo Grid: Import Geometry Problems
 
Hello,

iam searching for a solution to import points into ansys turbo grid. unfortunately i have just the blade geometry with the points in x,y,z positions. So i added two points as shroud and two points as hub. after doing this, turbo grid had the error:
ERROR Start and end parametric value are identical.
ERROR
Trim operation failed to produce any surfaces for surface Blade_1_tr_cl.
ERROR
Trim operation failed to produce any surfaces for surface Blade_1_tr_low.

Has anyone a good idea how i could fix this problem?

thanks a lot!

davidvalladares July 31, 2015 17:32

Hi Polito, now I am having the same problem you posted a couple of years ago and I am interested to know if you solved that problem and how you did it.

Thanks a lot


All times are GMT -4. The time now is 10:18.