CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Primitive 2D region in CFX (https://www.cfd-online.com/Forums/ansys-meshing/126181-primitive-2d-region-cfx.html)

Henry Arrigo November 10, 2013 07:06

Primitive 2D region in CFX
 
3 Attachment(s)
Hello all;
I generated a structured mesh over a swept wing in ICEM and then converted to .cfx5 and opened in ANSYS CFX. After importing the mesh I detected a primitive 2D region that can be seen in the attached photos. I don t know wh is the problem. Although I assigned the surrounding surfaces next to wing to wing part, there seems to be some non-assigned elements which forms the primitive 2D region. Does anybody have any idea what s the problem and how can I fix it?
Thank you

Far November 10, 2013 09:17

i dont see any problem. do you observe any problem in solution?

Henry Arrigo November 10, 2013 09:32

I haven t gone through solving yet because I thought it would result in convergence problem. The point is when I use Ansys meshing the whole wing forms a single part in CFX without any non-assigned elements.

Far November 10, 2013 10:20

please go ahead and let us know if you get into trouble.


All times are GMT -4. The time now is 06:05.