CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ANSYS Meshing] Meshing Failure for four geometries

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 14, 2013, 14:37
Default Meshing Failure for four geometries
  #1
New Member
 
Ben Nicholls
Join Date: Oct 2013
Posts: 6
Rep Power: 3
bnicholls92 is on a distinguished road
Hi,

I am meshing four Geometries created in CAD. I am currently meshing using Ansys Meshing as this appears to be easier than meshing using ICEM CFD. However, each time I attempt to mesh the CAD geometries which I have cut from the enclosure/extrusion around the geometry. However, each time I attempt to mesh it fails. I have included links to the screenshots with all my settings showing:
Geometry one:
https://www.dropbox.com/sh/a56r6v15jiczgnu/DKyBddekKc
Geometry two:
https://www.dropbox.com/sh/hv2jlz9cmh1p1iq/lnd0b8GoGY
Although this meshes it does not update in project view
Geometry three:
https://www.dropbox.com/sh/l9g9r0379prgyy2/PS1rHbLHnq
Geometry four:
https://www.dropbox.com/sh/qm3tgv7gtnbrvaz/hBis_F-Urj
Although this meshes it does not update in project view
bnicholls92 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Meshing problem --> Thermo failure erichu Mesh Generation & Pre-Processing 0 April 8, 2013 10:59
[ANSYS Meshing] Can I use ANSYS Meshing for manual meshing? Kirjain ANSYS Meshing & Geometry 3 June 12, 2012 08:35
Meshing complex white-light/GOM based STL models jola Main CFD Forum 13 January 30, 2012 02:35
[GAMBIT] 3D Cooper Meshing failure ritwik ANSYS Meshing & Geometry 0 December 1, 2010 08:04
Meshing AutoCAD geometries using ICEM Yuqing CFX 2 November 16, 2006 21:08


All times are GMT -4. The time now is 04:22.