CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Translation of ground plane with provided mesh (http://www.cfd-online.com/Forums/ansys-meshing/127597-translation-ground-plane-provided-mesh.html)

jackchilvers December 15, 2013 09:24

Translation of ground plane with provided mesh
 
Dear all,

I have been provided with a structured hex H-mesh for a high-downforce aerofoil placed in proximity to the ground (which is of course the lower edge of the mesh domain). I am attempting to investigate the effect of altering the vertical distance between the aerofoil and the ground.

My question is; using ICEM, which approach can be used to easily translate the aerofoil vertically relative to the ground plane?

Thank you for reading and I look forward to any response. Apologies if any details have been omitted, please ask if you need any further information.

JC


All times are GMT -4. The time now is 11:35.