 |
 |
 |
|
|
|
[Sponsors] | ||||
March 5, 2014, 08:43
|
Volume mesh not being meshed
|
#1 |
|
New Member
Joao Correia
Join Date: Jul 2012
Posts: 15
Rep Power: 13  |
Hi all,
I'm trying to mesh a geometry and the surface mesh comes out fine. I check it for errors and smooth it, and all appears to be fine. Then when meshing the volume mesh the end result is just the surface mesh. No volume elements are meshed. Any ideas what it could be and how to solve it? |
|
|
|
|
|
March 5, 2014, 13:46
|
|
#3 |
|
New Member
Joao Correia
Join Date: Jul 2012
Posts: 15
Rep Power: 13 |
It basically looks like it finished a normal volume mesh compute and the element number is the same as the surface mesh. Then when I try to smooth the mesh (after error checks) only tri are there.
I asked someone else in the office and they suffered from the same a few months ago and never found out what the problem was. |
|
|
|
|
|
|
March 6, 2014, 18:52
|
|
#4 |
|
Senior Member
Julio Mendez
Join Date: Apr 2009
Location: Fairburn, GA. USA
Posts: 290
Rep Power: 18  |
Could you fix your problem, this is maybe you did not define the volume region... maybe in ANSYS CFX or within ICEM... if you could solve this issue, please share your solution!!!
I am facing a similar problem right now |
|
|
|
|
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [snappyHexMesh] Add Mesh Layers doesnt work on the whole surface | Kryo | OpenFOAM Meshing & Mesh Conversion | 13 | February 17, 2022 07:34 |
| Moving mesh | Niklas Wikstrom (Wikstrom) | OpenFOAM Running, Solving & CFD | 122 | June 15, 2014 06:20 |
| [ICEM] ICEM 3D : only surfaces meshed. How can I mesh the volume ? | Rion | ANSYS Meshing & Geometry | 0 | December 18, 2012 08:40 |
| [Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 03:52 |
| Cannot mesh volume | Wendy Tjan | FLUENT | 4 | December 11, 2008 06:03 |
Linear Mode
