Meshing of sphere shape

mhkennedy · January 22, 2014, 11:19

How did you associate to the hemisphere surface, I have managed to mesh a full sphere by using associate face to surface however this does not work with the hemisphere?

Far · January 22, 2014, 14:21

show some pics please...

mhkennedy · January 23, 2014, 08:34

here is a picture of the sphere

Far · January 23, 2014, 09:10

first associate the edge tu curves on ground.

Then hide the all other surface except sphere.

Use index blocking and only choose the block surrounding the sphere.

Change material of the block inside sphere to solid or delete it(you have just made it visible in last step using index blocking)

Go to association panel again and snap vertices. you can move vertices on the sphere surface if you want to optimize the mesh.

To create ogrid around sphere select the block inside sphere (solid) and select option around and also select face on the ground.

Far · January 23, 2014, 09:43

Can you please post this question in ANSYS Meshing forum.

January 22, 2014, 11:19	Meshing of sphere shape	#1
mhkennedy New Member Michael Join Date: Jan 2014 Posts: 3 Rep Power: 12	How did you associate to the hemisphere surface, I have managed to mesh a full sphere by using associate face to surface however this does not work with the hemisphere?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ANSYS Meshing] Structured Volumetric Meshing in Workbench for a Sphere	AS_Aero	ANSYS Meshing & Geometry	0	March 19, 2013 06:28
[ICEM] meshing a sphere - large deviation from perfect sphere	murx	ANSYS Meshing & Geometry	25	August 15, 2012 12:37
[snappyHexMesh] Meshing a sphere with snappyHexMesh	Cyberholmes	OpenFOAM Meshing & Mesh Conversion	2	July 19, 2011 16:46
Meshing a sphere using ICEM	lost.identity	ANSYS Meshing & Geometry	1	March 13, 2011 20:19
meshing F1 front wing	Steve	FLUENT	0	April 17, 2003 12:37

January 22, 2014, 14:21		#2
Far Super Moderator Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,553 Blog Entries: 6 Rep Power: 54	show some pics please...

January 23, 2014, 09:10		#4
Far Super Moderator Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,553 Blog Entries: 6 Rep Power: 54	first associate the edge tu curves on ground. Then hide the all other surface except sphere. Use index blocking and only choose the block surrounding the sphere. Change material of the block inside sphere to solid or delete it(you have just made it visible in last step using index blocking) Go to association panel again and snap vertices. you can move vertices on the sphere surface if you want to optimize the mesh. To create ogrid around sphere select the block inside sphere (solid) and select option around and also select face on the ground.

January 23, 2014, 09:43		#5
Far Super Moderator Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,553 Blog Entries: 6 Rep Power: 54	Can you please post this question in ANSYS Meshing forum.