CFD Online Logo CFD Online URL
Home > Forums > ANSYS Meshing & Geometry

[ICEM] Edge Meshing Parameters

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   February 19, 2014, 10:12
Question Edge Meshing Parameters
New Member
Michael Krieger
Join Date: Sep 2013
Posts: 1
Rep Power: 0
Mikri is on a distinguished road
Is there an easier way to set the edge meshing parameters in ICEM 14.5, so that the edge mesh becomes coarser towards its end points, than using the Spline Mesh law?
Mikri is offline   Reply With Quote


edge params, icem

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[ANSYS Meshing] Ansys meshing - unwanted edge splits alparmat ANSYS Meshing & Geometry 3 January 6, 2015 12:53
[ANSYS Meshing] Meshing around sharp trailing edge in CFX ttu004 ANSYS Meshing & Geometry 2 November 8, 2013 03:54
[ICEM] Shifted Periodic topology venkat_aero2007 ANSYS Meshing & Geometry 17 August 27, 2013 01:41
[ICEM] Edge parameters problem fd99 ANSYS Meshing & Geometry 4 April 17, 2012 07:39
[ICEM] Error Meshing Edge! campos ANSYS Meshing & Geometry 2 July 20, 2010 09:25

All times are GMT -4. The time now is 21:03.