CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

hexa mesh for turbines using ICEM

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 16, 2014, 22:15
Default hexa mesh for turbines using ICEM
  #1
New Member
 
chiranjivi
Join Date: Mar 2014
Posts: 5
Rep Power: 4
vega6 is on a distinguished road
Can I get an idea on the meshing techniques for this runner http://www.ltu.se/cms_fs/1.111520!/file/Runner.zip
vega6 is offline   Reply With Quote

Old   March 17, 2014, 01:33
Post
  #2
New Member
 
chiragsvnit's Avatar
 
Chirag Trivedi
Join Date: Sep 2009
Location: Norway
Posts: 24
Rep Power: 9
chiragsvnit is on a distinguished road
Send a message via Skype™ to chiragsvnit
In that geometry Mesh already prepared and included.
(1) Open Geometry in ICEM *.tin file
(2) Import block file *.blk
(3) Create pre-mesh.
(4) Convert to unstructured

For You must have knowledge about ICEM CFD Blocking technique.
chiragsvnit is offline   Reply With Quote

Old   March 17, 2014, 01:46
Default
  #3
New Member
 
chiranjivi
Join Date: Mar 2014
Posts: 5
Rep Power: 4
vega6 is on a distinguished road
I wanted to know on how they have done it, especially the blocking of the turbine.
Any ideas on how to recreate the same mesh with the geometry file.
vega6 is offline   Reply With Quote

Old   March 17, 2014, 11:38
Default
  #4
New Member
 
chiragsvnit's Avatar
 
Chirag Trivedi
Join Date: Sep 2009
Location: Norway
Posts: 24
Rep Power: 9
chiragsvnit is on a distinguished road
Send a message via Skype™ to chiragsvnit
Then You have to learn blocking techniques. You may start from the tutorial available in ICEM CFD. The blocking can be performed any type of geometry just you have to explore the decomposition technique using available commands.
chiragsvnit is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Unstructure Meshing Around Imported Plot3D Structured Mesh ICEM kawamatt2 ANSYS Meshing & Geometry 17 December 20, 2011 12:45
ICEM hexa mesh built with v10 deformed in v11 (degenerated edges) cfxicem ANSYS Meshing & Geometry 1 October 14, 2009 15:06
ICEM HEXA to CFX-PRE mesh export pb jaber ANSYS Meshing & Geometry 0 April 2, 2009 17:21
icem hexa mesh beginner icem beginner Main CFD Forum 3 July 9, 2008 07:08
ICEM hexa mesh tutarial 2d car problem cfduser FLUENT 0 March 8, 2008 17:16


All times are GMT -4. The time now is 10:37.